How An Audio Engineer Mixes When Mastering Music

Note: A fine introduction to the subject of mastering music. This reference article covers the value of getting a good master done whether you are seeking to shop it professionally or not, or through an offline or online professional. The main factor should be faithfully producing the best realization of your music. So you’re a musician that just recorded your first album. You probably went into a recording studio and played all of your parts a couple of times, with the audio engineer handling all of the technical stuff. As far as you know, they should be able to take all the parts they recorded, burn it to a disc, and so on. The uses of the finished product are of value to parties ranging from hobbyists, career musicians, to filmmakers.

How An Audio Engineer Mixes When Mastering Music

Author:  Colton Little

So you’re a musician that just recorded your first album. You probably went into a recording studio and played all of your parts a couple of times, with the audio engineer handling all of the technical stuff. As far as you know, they should be able to take all the parts they recorded, burn it to a disc, and then it should be ready to press. While this isn’t completely wrong, most professional musicians take their mixed down recording and pass it off to someone else for mastering.

What is mastering?
Mastering is the final step in the production of an album where they add the final ‘polish’ to the recording. This is done by technically enhancing the clarity of the mixes. This makes the compilation of songs sound more coherent, more ‘together’. This also ensures that the mixes sound well on all listening devices.

Well, that’s all fine and dandy, but does a professional mastering technician do when mastering a recording?

1.    Volume Level Maximization
This is to make sure that all audio is at maximum volume, so that all songs are at the same volume level. Ever watch late night TV, where the volume of the commercials are a couple notches higher than the show you were watching? If a professional mastering engineer was involved, they would raise the volume of TV show to match the vmastering musicolume of the commercials.

2.    Ensuring a Consistent Balance of Frequencies
This ensures that all frequencies are accounted for in the recording; bass, mids, and treble, so that there are no areas where there is no bass/mids/treble.

3.    Noise Reduction
This is the process of removing noise from an audio signal. When using analog technology, sound recordings exhibit a type of noise known as tape hiss. This is related to the particle size and texture used in the magnetic emulsion that is sprayed on the recording media, and also to the relative tape velocity across the tape heads.

4.    Encoding
A professional mastering lab may also take your recording and encode the UPC (Universal Product Code), ISRC (International Standard Recording Code), CD Text (additional information about the CD, e.g. album name, song name, and artist name) or other PQ information.

5.    Error Checking
This ensures the integrity of the data stream during CD duplication / replication at any CD manufacturing plant.

Still confused about what a professional mastering engineer does to your CD audio recording when you hand it off to them? Don’t worry, audio mastering is a very complicated process. I just hope that you better understand why professional mastering is an integral part of the whole audio production process. It can make a world of difference!

Article Source: http://www.articlesbase.com/education-articles/how-an-audio-engineer-mixes-when-mastering-music-2690970.html

About the Author

For tips on chameleon habitat and chameleon pet, visit the Chameleon Lizard website.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>